vlmw322.. www.vishay.com vishay semiconductors rev. 1.3, 16-may-13 1 document number: 81184 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 power smd led plcc-4 description the vlmw322.. white led is an advanced product in terms of heat dissipation. the leadframe profile of this plcc-4 smd package is optimized to reduce th e thermal resistance. this allows higher drive curren t and doubles the light output compared to vishays high intensity smd led in plcc-2 standard package. product group and package data ? product group: led ? package: smd plcc-4 ? product series: power ? angle of half intensity: 60 features ? 3 cathode pins, 1 anode pin ? high efficient ingan technology ? long life time, due to silicone casting ? angle of half intensity ? = 60 ? available in 8 mm tape ? luminous intensity and color categorized per packing unit ? luminous intensity ra tio per packing unit i vmax. /i vmin. ? 1.6 ? esd-withstand voltage: up to 2 kv (hbm) according to jesd22-a114-b ? preconditioning: accordi ng to jedec level 2a ? compatible with ir-reflow, vapor phase, and wave soldering processes according to cecc 00802 and j-std-020 ? aec-q101 qualified ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 applications ? camera flash light ? signals, signs, and symbol luminaire ?marker lights ? interior and exterior automotive lighting (brake lights, turn lights, backlighting, side markers) ? indicator lighting ? general and architectural lighting ? backlighting (advertising, di splays, lcds, switches, ...) note (1) driving the led in reverse direction is suitable for a short term application 19210_1 parts table part color luminous intensity (mcd) at i f (ma) coordinate (x, y) at i f (ma) forward voltage (v) at i f (ma) technology min. typ. max. min. typ. max. min. typ. max. VLMW322ABBB5K8L-08 white 1400 2200 2850 30 - 0.33, 0.33 - 30 2.9 3.4 4 30 ingan on sic vlmw322baca5k8l-08 white 1800 2800 3550 30 - 0.33, 0.33 - 30 2.9 3.4 4 50 ingan on sic absolute maximum ratings (t amb = 25 c, unless otherwise specified) ? vlmw322.. parameter test condition symbol value unit reverse voltage (1) v r 5v dc forward current t amb ? 60 c i f 50 ma surge forward current t p ? 10 s i fsm 0.3 a power di ssipation pv 200 mw junction temperature t j 125 c operating temperature range t amb - 40 to + 110 c storage temperature range t stg - 40 to + 110 c thermal resistance junction/ambient mounted on pc board (pad design see page 6) r thja 300 k/w
vlmw322.. www.vishay.com vishay semiconductors rev. 1.3, 16-may-13 2 document number: 81184 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of 11 %. ? the above type numbers repres ent the order groups which include only a few brightness groups. only one group will be shipped on each reel (there will be no mixing of two groups on each reel). ? in order to ensure availability, single brightness groups will not be orderable. ? in a similar manner for colors where wavelength groups are measured and binned, single wave length groups will be shipped on any one reel. ? in order to ensure availability, single wavelength groups will not be orderable. note ? chromaticity coordinate groups are tested at a current pulse direction of 25 ms and a tolerance of 0.01. optical and electrical characteristics (t amb = 25 c, unless otherwise specified) ? vlmw322.., white parameter test condition p art symbol min. typ. max. unit luminous intensity i f = 30 ma vlmw322abbb5k8l i v 1400 2200 2850 mcd vlmw322baca5k8l i v 1800 2800 3550 mcd luminous flux i f = 30 ma vlmw322abbb5k8l ? v -7000- mlm vlmw322baca5k8l ? v -8900- mlm chromaticity co ordinate x, y acc. to cie 1931 i f = 30 ma x - 0.33 - y - 0.33 - angle of half intensity i f = 30 ma ? - 60- deg forward voltage i f = 30 ma v f 2.9 3.4 4 v reverse voltage i r = 10 a v r 5--v temperature coefficient of v f i f = 30 ma tc vf -- 3.6-mv/k temperature coefficient of i v i f = 30 ma tc iv -- 0.5-%/k temperature coefficient of x i f = 30 ma tc x - - 0.0002 - ? x/k temperature coefficient of y i f = 30 ma tc y - - 0.0003 - ? y/k luminous intensity classification group light intensity (mcd) standard min. max. ab 1400 1800 ba 1800 2240 bb 2240 2850 ca 2850 3550 chromaticity coordinated groups for white smd led xy xy 5l 0.291 0.268 7l 0.330 0.330 0.285 0.279 0.330 0.347 0.307 0.312 0.347 0.371 0.310 0.297 0.345 0.352 5k 0.296 0.259 7k 0.330 0.310 0.291 0.268 0.330 0.330 0.310 0.297 0.338 0.342 0.313 0.284 0.352 0.344 6l 0.310 0.297 8l 0.345 0.352 0.307 0.312 0.347 0.371 0.330 0.347 0.367 0.401 0.330 0.330 0.364 0.380 6k 0.313 0.284 8k 0.352 0.344 0.310 0.297 0.338 0.342 0.330 0.330 0.364 0.380 0.330 0.310 0.360 0.357
vlmw322.. www.vishay.com vishay semiconductors rev. 1.3, 16-may-13 3 document number: 81184 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - forward current vs. ambient temperature fig. 2 - relative luminous intensity vs. forward current fig. 3 - forward current vs. forward voltage fig. 4 - relative intensity vs. wavelength fig. 5 - relative luminous in tensity vs. angular displacement fig. 6 - white grouping smd t amb - ambient temperature (c) 21880 i f - forward current (ma) 0 10 20 30 40 50 60 020406080100120 i f - forward current (ma) 21881 i v rel - relative luminous intensity 0.01 0.1 1 10 110100 v f - forward voltage (v) 21882 i f - forward current (ma) 1 10 100 012345 - wavelength (nm) 21883 i rel - relative luminous intensity 0 0.2 0.4 0.6 0.8 1.0 1.2 400 450 500 550 600 650 700 0.4 0.2 0 95 10319 0.6 0.9 0.8 0 30 10 20 40 50 60 70 80 0.7 1.0 i v rel - relative luminous intensity ? - angular displacement 0.25 0.27 0.29 0.31 0.33 0.35 0.37 0.40 0.35 0.30 0.25 0.20 x-coordinates y-coord inates 6l 5l 7l 8l 6k 5k 7k 8k 19784_3
vlmw322.. www.vishay.com vishay semiconductors rev. 1.3, 16-may-13 4 document number: 81184 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 reel dimensions in millimeters 20983 gs08 = 2000 pcs
vlmw322.. www.vishay.com vishay semiconductors rev. 1.3, 16-may-13 5 document number: 81184 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 taping dimensions in millimeters 21241
vlmw322.. www.vishay.com vishay semiconductors rev. 1.3, 16-may-13 6 document number: 81184 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 optional pad design dimensions in millimeters ? (reflow-soldering), r thja = 290 k/w soldering profile fig. 7 - vishay lead (pb)-free reflow soldering profile (acc. to j-std-020) fig. 8 - double wave soldering of opto devices (all packages) 21240 0 50 100 150 200 250 300 0 50 100 150 200 250 300 t [s] t [c] 255c 240 c 245 c max. 260 c max. 120 s max. 100 s 217 c max. 30 s max. ramp up 3 c/s max. ramp down 6 c/s 255 c 19470-3 max. 2 cycles allowed ir reflow soldering profile for lead (pb)-free soldering preconditioning acc. to jedec level 2a 235 c to 260 c 2 k/s ca. 200 k/s second wave first wave 5 s full line: typical dotted line: process limits time (s) temperature (c) lead temperature 300 250 200 150 100 50 0 0 50 100 150 200 250 948626-1 ttw soldering (acc. to cecc00802) 100 c to 130 c forced cooling ca. 2 k/s ca. 5 k/s
vlmw322.. www.vishay.com vishay semiconductors rev. 1.3, 16-may-13 7 document number: 81184 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 bar code product label (example) a) type of component b) manufacturing plant c) sel - selection code (bin): ? e.g.: v1 = code for lu minous intensity group ? 5l = code for chrom. coordinate group d) date code year/week e) day code (e. g. 1: monday) f) batch no. g) total quantity h) company code dry packing the reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. final packing the sealed reel is packed in to a cardboard box. a secondary cardboard box is used for shipping purposes. recommended method of storage dry box storage is recommended as soon as the aluminum bag has been opened to preve nt moisture absorption. the following conditions should be observed, if dry boxes are not available: ? storage temperature 10 c to 30 c ? storage humidity ? 60 % rh max. after more than 672 h under these conditions moisture content will be too high for reflow soldering. in case of moisture absorptio n, the devices will recover to the former condition by drying under the following condition: 192 h at 40 c + 5 c/- 0 c and < 5 % rh (dry air/nitrogen) or ? 96 h at 60 c + 5 c and < 5 % rh for all device containers or ? 24 h at 100 c + 5 c not suitable for reel or tubes. an eia jedec standard jesd22 -a112 level 2a label is included on all dry bags. example of jesd22-a1 12 level 2a label esd precaution proper storage and handling pr ocedures should be followed to prevent esd damage to the devices especially when they are removed from the antistatic shielding bag. electro-static sensitive devices warning labels are on the packaging. 106 37 a h bc d e f g 19795 aluminum bag label reel 15973 l e v e l caution this bag contains moisture ? sensitive devices 1. shelf life in sealed bag 12 months at <40c and < 90% relative humidity (rh) 2. after this bag is opened devices that will be subjected to infrared reflow, vapor - phase reflow, or equivalent processing (peak package body temp. 260c) must be: a) mounted within 672 hours at factory condition of < 30c/60%rh or b) stored at <1 0% rh. 3. devices require baking before mounting if: a) humidity indicator card is >10% when read at 23c + 5c or b) 2a or 2b is not met. 4. if baking is required, devices may be baked for: 192 hours at 40c + 5c/ - 0c and <5%rh (dry air/nitrogen) or 96 hours at 605 o cand <5%rh for all device containers or 24 hours at 1005c not suitable for reels or tubes bag seal date: ______________________________ (if blank, see bar code label) note: level defined by eia jedec standard jesd22 - a113 2a 19786
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
